Transcript of the french balcony Installation Video
[0:00–0:07]
[Scene] Tobias stands in a bright room next to the Midea PortaSplit. He waves briefly and points to the unit.
[Dialogue – Tobias] "Hello, my name is Tobias, and I’ll show you how to set up the Midea PortaSplit on your window."
[0:08–0:16]
[Scene] A blue graphic with the text: "Setting up PortaSplit on French Balconies". The video cuts to a French balcony.
[Dialogue – Tobias] "On French balconies, the outdoor unit is attached to the railing using the universal bracket."
[0:17–0:34]
[Scene] Graphic slides list the required parts (protective plate, bracket, screws, steel cable, Velcro straps, locking mechanism).
[Dialogue – Tobias] "For this, you will need the protective plate, the universal bracket, six screws, the steel cable, Velcro straps, and the window lock."
[0:35–0:52]
[Scene] Close-up of Tobias attaching part 1 of the window bracket to the back of the outdoor unit with four screws.
[Dialogue – Tobias] "Part 1 of the bracket must be attached to the back of the outdoor unit with four screws. Pay attention to the numbering."
[0:53–1:11]
[Scene] Tobias shows the individual parts (parts 2 and 3) on a table and swaps part 2 for part 4.
[Dialogue – Tobias] "Swap part 2 for part 4 so that the bracket can be hung on the railing later. Connect both parts using two screws."
[1:12–1:32]
[Scene] Tobias attaches the steel cable to the bracket and the indoor unit, then hangs the bracket on the railing.
[Dialogue – Tobias] "Hook in the steel cable for security. Run it over the railing and attach it to the indoor unit. Pay attention to the routing."
[1:33–1:52]
[Scene] Tobias secures the bracket to the railing with the Velcro straps.
[Dialogue – Tobias] "Attach the bracket to the railing and secure it with the Velcro straps. This significantly reduces vibrations during operation."
[1:53–2:12]
[Scene] Tobias slides the outdoor unit into the bracket and closes the window.
[Dialogue – Tobias] "Slide the outdoor unit into the tracks until it reaches the stop. Then, close the window completely."
[2:13–2:30]
[Scene] Graphic shows the minimum distance of 25 cm between the wall and the indoor unit.
[Dialogue – Tobias] "Note: The indoor unit must be at least 25 centimeters away from the wall to ensure proper ventilation."
[2:31–2:48]
[Scene] Tobias sticks the window lock to the window frame and sash.
[Dialogue – Tobias] "The window lock is self-adhesive. Position it so that the window stays securely closed when the unit is installed."
[2:49–3:00]
[Scene] A finger presses the power button on the unit's control panel.
[Dialogue – Tobias] "You can now switch on your PortaSplit and start using the device."
[3:01–3:20]
[Scene] Condensation drips from the outdoor unit; close-up of the drain.
[Dialogue – Tobias] "Condensation is automatically routed to the outdoor unit and drips off. If needed, you can connect the drain hose."
[3:21–3:40]
[Scene] Tobias turns off the unit and pulls the plug.
[Dialogue – Tobias] "For uninstallation: Switch the device off, pull the plug, and store the cable on the back of the indoor unit."
[3:41–3:58]
[Scene] Tobias places the protective plate on the indoor unit and lifts the outdoor unit out of the bracket.
[Dialogue – Tobias] "Place the protective plate on the indoor unit and carefully lift the outdoor unit out of the bracket."
[3:59–4:18]
[Scene] Tobias loosens the Velcro straps and removes the bracket.
[Dialogue – Tobias] "Loosen the Velcro straps and remove the bracket. Finally, remove the safety cable. You're done."
[4:19–4:43]
[Scene] The Midea PortaSplit stands in the room, the Midea logo appears.
[Dialogue – Tobias] "For more information, you can always check the included user manual."