---mou-18hn1(od)/gallery2.png)
---mou-18hn1(od)/gallery4.png)
---mou-18hn1(od)/gallery1.png)
---mou-18hn1(od)/gallery3.png)
History
Country/Region
Malaysia
Malaysia
2.0HP Ceiling Concealed Non-Inverter
MTI-18HRN1(ID) | MOU-18HN1(OD)
-
Built-in Drain PumpThe drain pump can lift the condensing water up to 750mm, which is convenient to install drainage pipes under most conditions. It also allows parts be replaced from the side where maintenance is easier.
-
PrimeGuard Coating for Long-lasting PerformanceThe unique anti-corrosive golden coating on the heat exchangers can withstand the salty air, rain and other corrosive elements. It also effectively prevents bacteria from breeding and improves heat efficiency
-
Light Weight and Compact DesignWith the weight decreases almost 20% and the size shrinks 12.5% in comparison with conventional one, the A6 duct save lots of installation efforts and time as well as creates bigger maintenance space.
Full specifications
Full specifications
- Category Ducted
- Capacity 2.0HP
- Power Source 220-240~/1/50
Indoor unit
- Indoor Air Flow 978 (575) m3/h(cfm)
- Dimensions (WxDxH) 880 x 674 x 210 mm
- Net/Gross Weight 23.8/29.5 Kg
Outdoor unit
- Dimensions (WxDxH) 770 x 300 x 555 mm
- Net/Gross Weight 36.5/39.7 Kg
Refrigerant piping
- Liquid side/Gas side Φ6.35/Φ12.7 (1/4”/1/2”) mm(inch)
- Max.refrigerant pipe length 25 m
- Max.difference in level 15 m
Misc
- Power Consumption 2,200 W
-
Register a Product
Register a ProductGet the most out of your product by taking a minute to register. Register Your Product -
Customer Support
Customer SupportDo you have questions about your Midea product? Midea Customer Service is here to help! Get Help -
FAQ
FAQFind answers about product setup, use and care, and repair. Find an Answer
